THE ART NEON

STEP 1

Begin by taking your LED Neon sign and place it flat up against the intended wall or space.

If your sign is particularly long or heavy, it's advisable to seek assistance from a friend to ensure safe handling.

THE ART NEON

STEP 2

While one person is holding the sign in place, use a marker pen to mark the wall where the mounting holes are located on the acrylic backing of the sign.

THE ART NEON

STEP 3

Mark all four holes in the same way. These marks will be your guide as you continue screwing.

THE ART NEON

STEP 4

Insert the smaller silver securing screw through the hollow entry.

Using an appropriate screwdriver drill bit, secure the small silver screw through the hollow base and into the wall, firmly attaching the hollow base to the wall.

THE ART NEON

STEP 5

Repeat this process until all hollow bases are securely attached to the wall.

THE ART NEON

STEP 6

Now, take your LED Neon sign and position it against these securely attached bases.

Ensure that the sign is aligned correctly.

Proceed to use the remaining wider screws to fasten the sign to each base, effectively securing the sign to the wall. Make sure to tighten these screws securely.

THE ART NEON

FINAL STEP

Now, plug the sign into the transformer and then into the wall outlet. Your sign should illuminate without any issues.