IP67 sign body for outdoor projects
Custom signage for storefronts, terraces, events and branded outdoor spaces. Share your artwork, placement photo, dimensions and exposure; we’ll prepare a free mockup and tailored outdoor specification.
Start with the environment
Outdoor is not one condition. A covered terrace, an exposed facade and a coastal venue need different planning. Choose the closest scenario.
Humidity, condensation and wind-driven spray can still reach a covered sign. Specify outdoor use whenever moisture exposure is possible, even when the location appears sheltered.
Include in your brief
The sign must be ordered with the outdoor specification from the beginning. We also review mounting, cable exit, connectors, controls and the power location rather than treating weather protection as a sign-only choice.
Include in your brief
Salt, persistent humidity, splash and wind load can affect mounting and component placement. We review these conditions before confirming whether the proposed design and location are suitable.
Include in your brief
If rain, humidity or overnight exposure is possible, choose the outdoor build. The event plan should include secure mounting, protected power, safe cable routing and a dry storage method between uses.
Include in your brief
The proposal confirms the sign build, adapter and control placement for the actual environment. The dimmer and RGB controller must remain indoors or suitably protected.
Outdoor specification
Plan the IP67 sign body, mounting, cable route, adapter and controls as one project.
For dry interiors protected from rain, snow, spray and condensation.
For eligible designs intended for exposed or moisture-prone locations.
Plan the complete installation
A placement photo lets us assess scale, exposure and the cable route with the real setting in view.
Show the full wall, nearby cover, access, surrounding space and where people will see the sign from.
Tell us about direct rain, snow, sun, humidity, salt air, splash and strong wind.
Share the wall material, usable width and height, plus the approximate viewing distance.
Show the nearest power point and preferred cable direction. Mention hardwiring or concealed wiring early.
Share the installation height, wall access and whether a local installer or electrician will handle the final fitting.
Made for real locations
We adapt the design, scale, backing and installation plan to the sign’s purpose and location.
Turn a name or logo into a visible landmark after dark and a recognizable brand feature by day.
Create an entrance marker, patio focal point, outdoor bar sign or branded photo moment.
Build a memorable centerpiece for festivals, launches, pop-ups, weddings and brand experiences.
Give a mobile business a portable identity when outdoor weather exposure is part of the brief.
Light rooftops, courtyards, entrances and guest spaces with a specification reviewed for the location.
Create a personal garden, backyard bar or terrace sign using the appropriate outdoor construction.
Real outdoor work
How outdoor projects work
A clear made-to-order process for one sign, an event or a multi-location project.
Send the artwork, placement photo, wall dimensions, city, deadline and expected weather exposure.
We adapt the layout and recommend the outdoor build, scale, backboard, cable exit and mounting approach.
Confirm the proposal and payment. If mockup approval is selected, production begins after approval.
Use the supplied installation guidance and a qualified local installer or electrician for hardwiring, elevated mounting or other specialist work.
Outdoor FAQ
Clear answers about the IP67 sign body, power setup, timing and installation.
No. A sign intended for rain, snow, humidity or other outdoor exposure must be ordered with the outdoor specification from the beginning. Standard indoor signs should remain in dry, protected interiors.
For our outdoor version, IP67 applies to the sign body and describes its resistance to dust and water under defined test conditions. It does not apply automatically to the adapter, dimmer or RGB controller, and the sign is not intended for underwater use.
If the adapter remains indoors, the standard adapter is sufficient. If it must remain outside, an outdoor waterproof adapter is required. The dimmer and RGB controller are not waterproof and must remain indoors or suitably protected. For an outdoor RGB sign, we recommend keeping the controller and adapter indoors and running the approved low-voltage cable to the sign.
Yes, when the sign is ordered with the outdoor specification. The IP67 sign body is intended for suitable exposed installations, while correct mounting, cable routing and placement of the adapter and controls remain part of the installation plan.
Possibly, but the location needs project review. Tell us about salt air, humidity, splash, wind and the distance from the water. The signs are not intended for underwater or permanently submerged use.
Standard production and delivery normally take 2–3 weeks. Express service takes 10–12 calendar days for eligible projects and includes priority production and express shipping for an additional fee. Timing starts after payment and, when mockup approval is selected, after approval.
Yes. Send the logo or artwork through our custom quote form and we’ll prepare a free mockup. Fine details may be simplified or combined with engraved or UV-printed acrylic so the design remains recognizable and suitable for production.
The right size depends on the artwork, wall dimensions, viewing distance and desired impact. Send a straight-on placement photo with at least one known measurement so we can recommend a useful scale.
Many signs use pre-drilled acrylic backing and supplied mounting hardware, so installation can be straightforward. The correct method still depends on the wall, sign size, height and weather exposure. See the Installation Guide, and use a qualified local installer or electrician for hardwiring, elevated mounting or specialist work.
Use the custom quote form for a logo, custom artwork or a more complex project, and select outdoor use in the form. If you are creating a text sign in the Online Design Studio or ordering a ready-made design, select the Outdoor option before adding it to your cart.
Start with the space
Send a straight-on placement photo, usable dimensions, viewing distance and the planned cable route. Add your artwork or wording and we’ll prepare a free visual proposal with the outdoor specification.
